Programmable 2000VA AC Power Source

Model BK9832B

3 Year Warranty

The BK9830B Series programmable AC power sources provide high performance and low total harmonic distortion in a 3U form factor. The addition of positive and negative DC offset voltages expands the AC capabilities to operate in DC and AC+DC output coupling modes. The user can select built-in and user-defined harmonic waveforms or select from standard sine, square or clipped sine outputs.

3-Phase power can be achieved by connecting 3 units of the same model in a master and slave configuration using the optional 3-Phase sync adapters. The frequency range is adjustable from 45 to 600 Hz in 3-phase mode.

Features & Benefits

  • AC, DC and AC+DC power source
  • 3-Phase capability using multiple AC sources and 3-Phase kit (TL983P-KIT)
  • Low total harmonic distortion meets the IEC 61000-3-2 standard
  • Comprehensive measurement capabilities Vrms, Arms, Vdc, +Apk, -Apk, inrush current, frequency, power factor, apparent power, reactive power, true power, and crest factor
  • 0.98 power factor at AC input stage
  • Built-in standard waveforms sine, square and clipped sine
  • 30 built-in THD waveforms
  • Amplifier mode with 1.2 kHz bandwidth for generating user-defined arbitrary waveforms
  • Step, List and Pulse modes for generating power line disturbance (PLD) simulations
  • List mode supports 10 user-defined programs with up to 100 programmable steps
  • Generate custom harmonic waveforms on a PC and download them to the instrument’s 5 non-volatile memory locations
  • Digital I/O port supporting external trigger, transient indication, failure status indication, remote inhibit, RS232, and external analog output level programming interface
  • Comprehensive protection modes OVP, OCP,OPP, OTP, fan failure, output timer and key lock
  • Downloadable LabVIEWTM driver and soft panel software for remote control
  • Standard USB (USBTMC-compliant), RS232, LAN, and GPIB remote interfaces

Applications

  • Pre-compliance testing
  • Simulate common grid faults, voltage sags, frequency, and phase disturbances, according to IEC61000-4-11/14/28/34
  • Electromagnetic compatibility (EMC), according to IEC61000-3-2
  • Evaluate transformers, TRIACs, SCRs, and passive components

Documentation

Software

Note/Description Version File Link
DRIVERS USB (Windows 7/8/8.1/10) V6.7.5 CP210X_USB_Driver.zip
Operating Software (Windows 7/8/10) V1.21.04 9830_Series_software.zip
Logiciel exploitation / Operating Software (Windows 7/10) 1.03 9830B_3phase_software.zip
LabVIEW 2020 Drivers 1.0 LV983X.zip
USBTMC Driver Installation Note - Note d'installation des drivers 1.0 USBTMC_Driver_Readme.txt
  • Replacement Unterminated AC Power Cord

    Replacement Unterminated AC Power Cord

    Model PCAK2

     Replacement unterminated power cord assembly with side directional "key" to prevent reverse connection orentation.

    Used with:

    • 9830B Series
    • XLN15010, XLN15010-GL
    • XLN30052, XLN30052-GL
    • XLN60026, XLN60026-GL
    • PVS Series
    • MR Series

     

  • Rackmount Ears with Handles

    Rackmount Ears with Handles

    Model RK3U

    Rackmount side brackets and handles for the 9830 Series.

  • 3-Phase Sync Adapter

    3-Phase Sync Adapter

    Model TL983P

    Replacement adapter for the 3-phase kit (TL983P-KIT), provides synchronization and timing signal for 3-phase operation. Additional adapters can be used with standard pin to pin RJ45 cables to create split-phase or multi-phase systems (> 3-phase).

  • 3-Phase Sync Adapter Kit

    3-Phase Sync Adapter Kit

    Model TL983P-KIT

    Provides required synchronization and timing signals for 3-phase operation. Includes three adapters (TL983P) and two standard pin to pin RJ45 cables. Compatible with 9832B or 9833B AC sources.